Nokia X2 Display Ways Nokia X2 White Display Problem Nokia X2 Lcd Connector Jumper

Nokia X2 Display Ways
Nokia X2 White Display Problem
Nokia X2 Lcd Connector Jumper

In this post i am posting the solution for nokia x2 display problem and lcd connector ways
jumper points. If your nokia X2 LCD/Display is not working properly consult the diagram below.

Before making the jumper i have marked for nokia X2 Display Connector in this diagram
check and make sure that a busted LCD or LCD Connector is not causing the problem. If You 
are sure that Your LCD And Display Connector are in good shape or if you have damaged the LCD 
Connector Prints Move on and make the jumper as shown in this diagram.


Please Note That we Will edit These Solutions Or Add New Ones If Found in this page at any time 
In the future. So Feel Free to come back any time on this page to stay up to date.

Here Are Display Problem Lcd Connector Ways Jumper. Please Observe Carefully.

Check the LCD for possible dammaged,cracked or brocken. Replace if necessary.

check the LCD pin connector for possible dammaged. clean, re-solder or replace if necessary.

Now check continuly between Display Connector to the resistor compounds. if any of then is track 

missing then make a jumper.

If the above procedures doesn't fix the problem the possible faulty is the main engine IC.

Try to re-heat or reball it.

If You have further Questions Please don't hesitate to leave a comment.

Note : Every Reapairing solutions are posted here is tested by at least one member of our team.

Use the information available here at your own risk. We are Not responsible if any harm comes to 

your device during the repairing proccess.